Answers are grounded in this paper and cite their sources.
A desirable process for realizing a low-carbon society is the direct conversion of dilute CO 2 from flue gases or air into highly concentrated hydrocarbons without a need for separate CO 2 capture and purification processes. In this study, we investigated the performance of integrated CO 2 capture and reduction to CH 4 over Ni-based dual-functional catalysts promoted with Na, K, and Ca. Ni/Na-γ-Al 2 O 3 exhibited the highest activity for integrated CO 2 (5% CO 2 ) capture and reduction, achieving high CO 2 conversion (>96%) and CH 4 selectivity (>93%). In addition, very low-concentration CO 2 (100 ppm CO 2 ) was successfully converted to 11.5% CH 4 at the peak point (>1000 times higher concentration than that of the supplied CO 2 ) over Ni/Na-γ-Al 2 O 3 . The Ni-based dual-functional catalyst exhibited a high CO 2 conversion exceeding 90%, even when 20% O 2 was present during CO 2 capture. Furthermore, an increased operation pressure had positive impacts on both CO 2 capture and CH 4 formation, and these advantageous effects were also observed when CO 2 concentration was at the level of atmospheric CO 2 (100–400 ppm). As the pressure increased from 0.1 to 0.9 MPa, CH 4 production capacity with 400 ppm CO 2 was enhanced from 111 to 160 μmol g cat –1 . This approach in combination with the efficient catalyst shows encouraging potential for CO 2 utilization, enabling direct air capture-conversion to value-added chemicals.
No takes yet. Share an insight, caveat, or question.
Kosaka et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: