Answers are grounded in this paper and cite their sources.
Fiber growth of Y3Al5O12 (YAG) matrix composite reinforced with the sapphire phase was investigated to manufacture sapphire/YAG eutectic composites using the micro-pulling-down (µ-PD) method. Both the sapphire and YAG phases were crystalline. We have controlled the fiber diameter from 200 µm to 2 mm. The maximal length was about 500 mm. The eutectic fibers have superior high-temperature strength properties, 580 MPa at 1500°C. In the tensile test at this temperature, the fiber showed considerable (about 10%) plastic deformation due to dislocation motion. The microstructure of this eutectic fiber has a very high thermal stability. No grain growth was observed after even 75 h of heat treatment at 1500°C in air atmosphere.
No takes yet. Share an insight, caveat, or question.
Yoshikawa et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: