This is the authors' abstract. We don't add key points for this paper.
Three methods based on aqueous electro-oxidation for patterning of a-C type DLC films have been investigated in recent years. Two of these are implemented on AFM and STM platforms under ambient conditions, with a local electrochemical cell being attached to the tip. The most recent method is electron beam assisted within an environmental SEM in a partial pressure of water. Under STM or AFM vacuum conditions, in the absence of an oxidant, but with exposure conditions comparable to those for electro-oxidation by AFM or STM, a metastable raised pattern can be generated, presumably due to the formation of an expanded resistive carbon phase. The latter is likely to arise from local thermal deposition at the point of 'contact' by the tip. The mechanisms have been investigated, and there is evidence, in the case of AFM, for the electro-oxidative process also being thermally activated. The technical merits of the three methods have been considered in terms of their efficiencies.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Myhra et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: