Answers are grounded in this paper and cite their sources.
The excitation force produced by thermal bending was calculated as a couple of equivalent bending momentum, which causes an equivalent thermal bending shape. The unbalance produced by thermal bending was also calculated in consideration of stiffness of bearings and the rotor. We compared the calculated vibration with the measured vibration of a heater-mounted rotor. The calculation error of the vibration amplitude in resonance is about 12% at the loop of the vibration mode on a critical speed. We also compared the calculated result by this method with that by simple method, in which the eccentricity of the rotor at main bearings is zero. We found that in case of calculating a thermal bending unbalance of a rotor, which has more than three bearings and that bearings stiffness is low, we should consider the stiffness of bearings and the rotor to estimate a thermal bending rotor vibration.
No takes yet. Share an insight, caveat, or question.
YAMAGUCHI et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: