Answers are grounded in this paper and cite their sources.
This work investigates the role of copper-based hole transport layers (HTLs) in suppressing rear-junction recombination and enhancing carrier selectivity in Sb 2 Se 3 thin-film solar cells (TFSCs). The validated reference device with an efficiency of 10.12% is first established, then Cu 2 O, CuSbS 2 , and CuI are introduced as HTLs. The influence of HTLs on device operation is systematically examined through current-voltage (J-V) characteristics, external quantum efficiency (EQE), surface recombination velocity (SRV), spatial recombination profiles, energy band alignment, and impedance spectroscopy (IS). The results reveal that copper-based HTLs form p + -p rear heterojunctions with Sb 2 Se 3 , generating built-in electric fields that extend the effective collection region and strongly suppress back surface recombination. Among the investigated materials, CuI provides the most favorable band alignment, combining a little valence band offset (VBO) (ΔE v =-0.2 eV) with a large conduction band offset (CBO) (ΔE c =+1.7 eV), which enables efficient hole extraction and strong minority carrier reflection. This configuration localizes recombination within the thin HTL, reduces sensitivity to high SRV, and significantly increases the recombination resistance (R Rec ) as confirmed by impedance analysis. As a result, the CuI-containing device exhibits a predicted efficiency of 16.8%, corresponding to an increase of 6.7 percentage points relative to the experimentally reported 10.12% reference device. These findings demonstrate that rear junction band offset engineering and electric field control are key design strategies for high-efficiency Sb 2 Se 3 solar cells.
No takes yet. Share an insight, caveat, or question.
Jalali et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: