Answers are grounded in this paper and cite their sources.
X-ray photoelectron spectroscopy (XPS) was applied to study the adsorbates on NiP-plated aluminium (NiP/Al) and glass substrates as used for hard disk production. For both substrates, XPS spectra of the surface as a function of the substrate heating treatment were taken. The substrate was heated in an ultrahigh vacuum (UHV) chamber for ∼3 s at the given temperature, which is comparable to the process time in production. The XPS measurements were performed at room temperature after cooling down of the disk. The untreated NiP/Al disk shows a surface contamination of ∼33 at.% carbon and 37 at.% oxygen. After heating to 150 °C, half of the carbon contamination is still left; 400 °C heating reduces carbon contamination from 33 at.% to 1 at.% and oxygen contamination from 37 at.% to 15 at.%. Producing an absolutely clean surface only by a short heating process seems to be impossible. Heating to temperatures above 350 °C leads to a segregation of magnesium to the surface. The glass substrate shows a much smaller contamination compared to the NiP/Al disk. Before heating, carbon contamination amounts to ∼8 at.%. After heating to 150 °C half of this amount is still left. Heating to 400 °C leads to a reduction to 1 at.% carbon contamination. The heating reduces surface contamination of all different carbon-containing molecules. After 300 °C there is only aliphatic carbon present on the surface. As for NiP/Al an absolutely clean surface cannot be achieved by using only a short heating process. Starting from temperatures of ∼300 °C, a segregation of K atoms to the bulk and Na atoms to the surface can be observed.
No takes yet. Share an insight, caveat, or question.
Ochs et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: