In order to find an effective method for urea removal from wastewater, a number of experiments were conducted in a batch reactor with α-Al2O3 and η-Al2O3 as catalysts, respectively. The results indicate that η-Al2O3 catalyst shows significantly higher urea removal rate than α-Al2O3 catalyst or the thermal hydrolysis, and the removal rate increases with increasing temperature, catalyst dosage and reaction time. Using η-Al2O3 catalyst, the urea concentration in wastewater is reduced to less than 1 mg/L at 165°C after 150 min. The reaction kinetics study shows that the hydrolysis of urea behaves as a pseudo-first-order reaction. From the calculated rate constants, η-Al2O3 exhibits an excellent catalytic activity for urea hydrolysis, whereas the activity of α-Al2O3 is considerably weak. In addition, the η-Al2O3 catalyst possesses good recycling ability. The slight loss of activity of η-Al2O3 should be attributed to the generation of a small amount of hydrated aluminas, and the activity can be recovered by calcination.
No takes yet. Share an insight, caveat, or question.
Shen et al. (2014) studied this question.
Synapse has enriched 5 related papers. Consider them for comparative context: