Answers are grounded in this paper and cite their sources.
Thin film nanocomposites (TFN) modified with nanofillers are potential alternatives to low-cost nanofiltration to produce fresh water. Here, we study glycine-functionalized hydrotalcite (eHT–gly) as a novel filler to enhance transport and static antifouling tendency of polyamide-based membranes. TFN membranes were prepared by coating a delaminated eHT–gly aqueous dispersion (0.005–0.25 wt%) onto the substrate prior to sequential MPD/TMC interfacial polymerization. The SEM-EDX data revealed a loading-dependent shift in the degree of polyamide layer crosslinking, based on a semi-quantitative O/N indicator. The disappearance of the XRD basal spacing, together with TEM imaging showing thin, electron-translucent nanosheet domains, indicates successful exfoliation. The film hydrophilicity (with a water contact angle of 43.6°) and the presence of a hydration layer facilitated by zwitterionic species of glycine gave better filtration results. The membrane containing 0.125 wt% eHT–gly produced 95% NaCl rejection at 111.7 LMH (at 0.2 MPa), higher than the native eHT membrane with NaCl rejection of 88.6% and flux of 87.7 LMH, respectively. The eHT–gly-modified membranes loaded with ≥0.05 wt% showed reduced static BSA adsorption, indicating a preliminary antifouling tendency. The eHT–gly is a potential nanofiller for surface modification of TFN membranes for low-pressure nanofiltration to produce freshwater from brine water.
No takes yet. Share an insight, caveat, or question.
Sari et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: