Answers are grounded in this paper and cite their sources.
In an unconsolidated heavy oil reservoir, cold heavy oil production with sand (CHOPS) has been the primary production method with good performance; however, the in-situ induced wormholes (i.e., dendritic and regional patterns) due to sand particle migration introduce large constraints for the potential enhanced oil recovery (EOR) processes. In this work, an integrated framework has been proposed to optimize performance of solvent-steam injection in a post-CHOPS reservoir where both dendritic and regional wormhole networks are generated and compared. More specifically, a dendritic wormhole network, obtained from combining rate transient analysis (RTA) and a newly developed pressure-gradient-based (PGB) sand failure criterion, was transformed and embedded into a reservoir geologic model and calibrated with the measured pressure and production profiles. By selecting thermal energy, injection rate, and bottomhole pressure as control variables, a genetic algorithm (GA) is integrated with orthogonal array (OA) and Tabu search to maximize the net present value (NPV) and thus obtain optimal oil recovery. The results indicate that the dendritic wormhole network demonstrates superior performance with respect to oil recovery and NPV compared to the regional wormhole network. For the optimal huff- n -puff (HnP) strategy for each of the six cycles, the dendritic wormhole network achieved an oil recovery factor of 6.853% and a NPV of 31.739 × 10 6 C$, which are respectively 3.5 times and 5.4 times of the regional wormhole network. Such differences mainly arise from the different morphologies of the dendritic and regional wormhole networks with the former being more physically realistic. Foamy oil flow has shown its positive impact on both oil recovery factor and NPV, which is particularly evident in the dendritic wormhole model due to the presence of high permeability channels. In addition to the computational costs, key challenges include uncertainties in characterizing wormhole geometry and assigning its petrophysical properties in a given reservoir. Future work will focus on dynamically updating wormhole characteristics conditioned to field monitoring and production data, quantifying uncertainties associated with wormhole geometries and the formation petrophysical properties, and extending the framework to multi-well patterns and other well configurations.
No takes yet. Share an insight, caveat, or question.
Hou et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: