Answers are grounded in this paper and cite their sources.
The experimental procedure is developed and tested on a laboratory scale and using layered samples of manmade geomaterials. Within the dual-permeability model, the procedure enables determining parameters that govern fluid flow and poroelastic deformation in fractured porous rock masses, namely, fracture permeability k₁ and mass transfer coefficient β , as well as their dependence on stresses σ . The testing procedure is proposed and implemented. In the procedure, under the stepwise increasing normal stress σ , the stationary flow rates Q₁(σ) and Q₂(σ) are measured in a quasiregular fractured porous sample at the preset pressure difference: using a standard setup ( Q₁ ) and in closed end-face fractures ( Q₂ ). The mathematical model of the experiment is constructed, and the analytical solution of the problem on stationary flow is obtained: pressure patterns in fractures, and stress-dependence of flow rates. The experimental data interpretation algorithm enables calculating k₁ and β by the recorded flow rates Q₁ and Q₂ . It is shown that the permeability k₁ is proportional to σ⁻² , and β remains almost unchanged.
No takes yet. Share an insight, caveat, or question.
Назаров et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: