Answers are grounded in this paper and cite their sources.
Using the transient hot‐wire method, the thermal conductivity properties of the molten Li 2 O–B 2 O 3 and K 2 O–B 2 O 3 systems were measured. The thermal conductivity increases with decreasing the temperature due to the borate structure change. In addition, calculations of the one‐dimensional Debye temperature and the phonon mean free paths as a function of temperature of the alkali borate systems were made. At a fixed temperature of 1273 K, the effect of the alkali oxide concentration on the thermal conductivity was evaluated. Within a range of 10–30 mol% Li 2 O (or K 2 O), a positive relationship between the thermal conductivity and 4‐coordinate boron was obtained. However, below 10 mol% Li 2 O (or K 2 O), the change in the intermediate‐range order of the borate structure had a more dominant effect on the thermal conductivity. Finally, the effect of cations on the thermal conductivity in the various molten R 2 O–B 2 O 3 (R=Li, Na and K) systems was considered. Depending on the type of cation, the change in the ionization potential had an effect on the thermal conductivity and also resulted in a change in the bond strength.
No takes yet. Share an insight, caveat, or question.
Kim et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: