We report on the structural and transport properties of EuBa2Cu3O7−x (Eu123) films on SrTiO3 substrates. A substrate temperature 100 °C higher than that used to deposit YBa2Cu3O7−x (Y123) is needed to grow high-performance Eu123 films directly on SrTiO3 substrates. However, this high-temperature restriction can be circumvented by inserting a seed layer (∼12 nm) of Y123, Gd123, or Dy123 between the substrate and the Eu123. A structural analysis reveals that a transition region that promotes the growth of the a-axis is first formed on the surface of the substrate if the Eu123 is deposited directly on SrTiO3 at a temperature of less than 800 °C. On the other hand, the use of a seed layer of another superconducting material restructures the Eu123 to the right phase without forming this transition region. Eu123 films with critical temperatures of 94 K and critical current densities of 5.8×106 A/cm2 at 75.5 K have been deposited under standard deposition conditions using such an approach.
No takes yet. Share an insight, caveat, or question.
Jia et al. (2003) studied this question.