Answers are grounded in this paper and cite their sources.
A pilot-scale batch reverse osmosis (RO) system with a flexible bladder was designed to recover additional water from RO concentrate. The sulfate-rich, ~6400-ppm concentrate was sourced from the Yuma Desalting Plant (Arizona, USA), which desalinates agricultural drainage water. The pilot produced 4.4 m 3 /day of permeate with 150 ppm total dissolved solids from the facility’s concentrate stream with a recovery ratio of 82.6%. Despite producing supersaturated brine, there was no performance deterioration due to scaling. Using a bladder for retentate pressurization limited average power to 633 W and the specific energy consumption to 3.3 kWh/m 3 . The pilot’s energy data informed a model of large-scale batch RO, which has the potential to desalinate the same water for less than 1 kWh/m 3 . Additionally, a model was developed to predict scaling likelihood in batch RO. This investigation demonstrates that batch RO is a viable technology for low-energy brine concentration beyond saturation limits.
No takes yet. Share an insight, caveat, or question.
Tow et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: