Answers are grounded in this paper and cite their sources.
A fluidized bed of magnetic particles, such as iron or magnetite, can be stabilized by applying an external magnetic field, as was shown earlier by Rosensweig and coworkers. The stabilization results in a suppression of bubble formation, little solids mixing and a much narrower residence time distribution of the gas flow; the gas flow rate in the dense phase is increased. In this experimental study the axial and radial mixing coefficients in the gas flow were determined as functions of several variables, such as gas flow rate and magnetic field strength. It appeared that the radial mixing coefficient is comparable to that in a fixed bed, and the axial mixing coefficient was greater than in a fixed bed but smaller than in a fluidized bed without stabilization. The axial mixing is the result of some channelling. The mixing of the solids is very low, and if there is a continuous solids flow through the bed, deviations from plug flow can be reduced by increasing the magnetic field strength. Apparently, the magnetically stabilized fluidized bed is well suitable for countercurrent gas-solid operations.
No takes yet. Share an insight, caveat, or question.
Geuzens et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: