Answers are grounded in this paper and cite their sources.
This paper presents and validates a unified spreadsheet-based framework for engineering mechanics education and preliminary design. Three modules are integrated within a single openly available workbook: multi-point resultant force and moment computation; axial normal stress with stress concentration effects for three geometric configurations (plate with hole, shoulder plate, stepped shaft); and beam deflection for simply supported and cantilever configurations under point loads. All governing equations are implemented as explicit closed-form expressions validated against analytical reference solutions for six independent cases; relative errors fall below 10−10 in all cases. Three worked exercises demonstrate the practical scope of the framework. A biomechanical multi-point force system yields joint moments of −6880, −33,421, and −58,241 N·mm at the wrist, elbow, and shoulder, respectively. A tensile shoulder plate with Kt≈1.85 produces σmax=232 MPa against σy=200 MPa, identifying a design failure; a parametric redesign with fillet radius r=10 mm reduces Kt to approximately 1.59 and σmax to approximately 198.7 MPa, restoring structural safety. A cantilever beam subjected to a 20,000 N tip load yields a maximum deflection of 13,133 μm. The framework constitutes a validated intermediate layer between manual analytical derivations and high-fidelity numerical simulations, applicable to preliminary design, parametric sensitivity studies, and engineering education at the linear elastic level.
No takes yet. Share an insight, caveat, or question.
Munich et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: