Answers are grounded in this paper and cite their sources.
Metallic biomaterials for bone repair and dental implant must combine adequate mechanical properties with long-term corrosion stability in physiological environments. Among them, β-type titanium alloys, such as Ti35Nb7Zr5Ta, have attracted increasing attention due to their low elastic modulus, absence of potentially cytotoxic elements, and improved mechanical compatibility with bone tissue. In this work, plasma electrolytic oxidation (PEO) coatings were synthesized on β-type Ti35Nb7Zr5Ta alloy substrates manufactured by two powder metallurgy routes: loose sintering (LS, 28% open and interconnected porosity, pore size ~35–200 μm) and full density compaction (FD, 0.8% closed porosity, pore size 150 μm). Two calcium phosphate-based electrolytes were employed: PEO-1 (0.02 M β-glycerophosphate/0.15 M calcium acetate) and PEO-2 (0.04 M β-glycerophosphate/0.15 M calcium acetate), the latter designed to increase phosphate content. In addition, the processing parameters were adjusted to increase the thickness of PEO-2 coatings. So, structural characterization revealed that PEO-2 coatings were substantially thicker (FD: 40.3 ± 1.5 μm; LS: 35.1 ± 1.3 μm) than PEO-1 coatings (FD: 11.3 ± 0.6 μm; LS: 7.1 ± 0.3 μm). Electrochemical tests in artificial saliva at 37 °C demonstrated that PEO coatings shifted corrosion potentials toward more noble values and reduced corrosion current densities. PEO-2 achieved the highest protection efficiency (η around 65% for LS and 90% for FD) and polarization resistance (Rp = 632.6·10 4 Ω·cm- 2 for FD PEO-2), as corroborated by EIS for dense coated substrates. Acellular in-vitro bioactivity assessment after 28 days in simulated body fluid showed that PEO-coated samples promoted significant Ca P surface precipitation, with PEO-2 surfaces reaching Ca/P atomic ratios of 1.60–1.65, approaching stoichiometric hydroxyapatite. Metal ion release remained below 0.025 mg·L −1 . These findings demonstrate that optimized PEO processing enhances both corrosion resistance and biocompatibility of porous β-Ti alloys for oral implant applications.
No takes yet. Share an insight, caveat, or question.
Rosa et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: