General Strategy for Designing Highly Selective Gas-Sensing Nanoreactors: Morphological Control of SnO2 Hollow Spheres and Configurational Tuning of Au Catalysts

This is the authors' abstract. We don't add key points for this paper.

Catalyst-loaded hollow spheres are effective at detecting ethanol with high chemical reactivity. However, this has limited the widespread use of catalyst-loaded hollow spheres in designing highly selective gas sensors to less-reactive gases such as aromatics (e.g., xylene). Herein, we report the preparation of xylene-selective Au–SnO 2 nanoreactors by loading Au nanoclusters on the inner surface of SnO 2 hollow shells using the layer-by-layer assembly technique. The results revealed that the sensor based on SnO 2 hollow spheres loaded with Au nanoclusters on the inner surface exhibited unprecedentedly high xylene selectivity and an ultrahigh xylene response, high enough to be used for indoor air quality monitoring, whereas the sensor based on SnO 2 hollow spheres loaded with Au nanoclusters on the outer surface exhibited the typical ethanol-sensitive sensing behaviors as frequently reported in the literature. In addition, the xylene selectivity and response were optimized when the hollow shell was sufficiently thin (∼25 nm) and semipermeable (pore size = ∼3.5 nm), while the selectivity and response decreased when the shell was thick or highly gas permeable with large mesopores (∼30 nm). Accordingly, the underlying mechanism responsible for the unprecedentedly high xylene sensing performance is discussed in relation to the configuration of the loaded Au nanoclusters and the morphological characteristics including shell thickness and pore size distribution. This novel nanoreactor concept can be widely used to design highly selective gas sensors especially to less-reactive gases such as aromatics, aldehydes, and ketones.