Answers are grounded in this paper and cite their sources.
Computational modeling reveals optimal transport layer pairings in tin-alloyed chalcogenide perovskite solar cells, indicating that interface alignment preserves bandgap-tuning gains.
Despite the promising thermal stability and non-toxic nature of chalcogenide perovskites such as BaZrS 3 , device-level optimization that accounts for both absorber composition and charge transport layer selection remains largely unexplored. Here we develop a composition-resolved optimization framework for BaZr 1−x Sn x S 3 (x = 0, 0.125, 0.25) solar cells using SCAPS-1D, evaluating 504 device configurations across 12 electron transport layers (ETLs) and 14 hole transport layers (HTLs). Sn alloying at x = 0.125 reduces the bandgap to 1.48 eV and increases the short-circuit current density (J SC ), whereas increasing the Sn content to x = 0.25 degrades the junction quality and reduces the built-in potential from 1.00 V to 0.52 V. Critically, we find that the optimal ETL/HTL combination depends strongly on the Sn composition. For unalloyed BaZrS 3 (x = 0), WO 3 provides a favorable conduction band offset of approximately + 0.2 eV and together with FeS 2 as HTL yields a maximum power conversion efficiency of 20.02%. Temperature-dependent analysis (300–400 K) reveals a V OC temperature coefficient of − 1.40 mV K − 1 , indicating good thermal stability with interface-limited recombination. Analysis of activation energy and Mott–Schottky characteristics shows that recombination is predominantly governed by interface-related processes, with well-defined junction properties observed for x = 0 and x = 0.125, while significant deviation from ideal behavior occurs at x = 0.25. The novelty of this work lies in the simultaneous optimization of Sn alloying and transport layer selection, demonstrating that a performance gain from bandgap tuning can be negated by unfavorable interface alignment if the transport layers are not re-optimized accordingly. These results provide a clear, evidence-based guideline for designing high-efficiency, lead-free chalcogenide perovskite solar cells.
No takes yet. Share an insight, caveat, or question.
Peyvast et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: