Answers are grounded in this paper and cite their sources.
Experimental analysis demonstrates phase-pure bismuth ferrite nanoparticle synthesis via tartrate chelation at 500 °C, indicating an eco-friendly route for magnetoelectric materials.
Bismuth ferrite (BiFeO 3 , BFO) is the most extensively investigated single-phase, room-temperature multiferroic oxide, but obtaining phase-pure nanoparticles remains difficult because of the narrow thermodynamic stability window of the perovskite phase and the persistent formation of Bi 2 O 3 and Fe 2 O 3 secondary phases. In this work, BiFeO 3 nanoparticles were synthesized through an aqueous organic gel route in which tartaric acid (C 4 H 6 O 6 ) served as the chelating and gel-forming agent for Bi 3 + and Fe 3+ nitrate precursors, in place of the more commonly reported citrate- or ethylenediaminetetraacetic acid (EDTA)-based routes — the central methodological novelty of this study, motivated by tartaric acid's lower cost, simpler two-step acid dissociation relative to citric acid, and substantially better biodegradability relative to EDTA. The Bi–Fe–tartrate precursor gel was dried and calcined for 2 h at six temperatures between 400 and 550 °C, and the resulting powders were characterized by Fourier-transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), and thermogravimetric/differential thermal analysis (TG/DTA). TG/DTA of the precursor gel showed a three-stage mass loss (≈91% of the initial mass) up to ≈ 450 °C, associated with dehydration, tartrate-complex decomposition, and residual-carbon burnout, with an exothermic feature near 280 °C marking the onset of perovskite crystallization. FT-IR spectra confirmed progressive sharpening of the diagnostic Fe–O and Bi–O octahedral stretching bands (≈440–555 cm −1 ) with increasing calcination temperature. XRD revealed a mixed-phase product containing Bi 2 O 3 and Fe 2 O 3 impurities at 400–475 °C, converging to a predominantly single-phase rhombohedral BiFeO 3 (space group R3c) from 500 °C onward, in reasonable agreement with JCPDS card no. 01–076–6047. The average crystallite size, calculated from the Scherrer equation, increased monotonically from 28 ± 3 nm at 450 °C to 39 ± 4 nm at 550 °C, remaining below the 62–64 nm periodicity of the BFO spin cycloid throughout, while FESEM confirmed quasi-spherical to quasi-rhombic particles in the 20–60 nm range. These results identify tartaric acid as an effective, low-cost chelating agent for producing sub-cycloidal, phase-pure BiFeO 3 nanoparticles of interest for magnetoelectric applications.
No takes yet. Share an insight, caveat, or question.
Sarowar et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: