Answers are grounded in this paper and cite their sources.
Experimental study demonstrates high thermal camera accuracy and dynamic tracking using video-based blackbody calibration, suggesting automated visual processing enhances standard verification.
Infrared thermal cameras are widely used for non-contact temperature measurement, but their indications are affected by measurement distance, temporal response, display resolution and scene stability. This paper presents an experimental evaluation of an infrared thermal camera using a blackbody reference source. Because direct digital output from the investigated instruments was not available, a video-based image-processing method was developed to extract both the blackbody reference temperature and the camera indication from recorded videos. Preliminary manual measurements at different camera-to-blackbody distances were evaluated using Mean Absolute Error, Root Mean Square Error and Bias, identifying 900 mm as the most suitable distance for the investigated setup. A slow quasi-static heating experiment was then performed at this distance to obtain a dense temperature-dependent error curve. The evaluation yielded MAE = 0.69 °C, RMSE = 0.81 °C and Bias = −0.62 °C, with the maximum deviation remaining within the manufacturer-declared accuracy limits. The video-based method revealed local error variations not visible from sparse manual measurements. Dynamic response tests showed response times below approximately 0.7 s, while 15 min repeatability tests confirmed stable readings with repeatability of approximately 0.1–0.3 °C. The results show that video-based image processing can complement conventional point-based verification.
No takes yet. Share an insight, caveat, or question.
Curilla et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: