Answers are grounded in this paper and cite their sources.
In today’s steel automotive industry, press hardened steels meet requirements of a lower CO2 consumption and of a better safety of drivers. These steels contain titanium nitrides which can downgrade the in-use properties. From this laboratory study, with a wide range of N (20–120 ppm) combined with high Ti variations (20–110.10−3 wt.%), clear conclusions can be highlighted. Titanium content is the key parameter to drive inclusions content, more than N, as there is a high segregation of Ti in the last liquid, due to a low partition coefficient combined with a low back-diffusion coefficient. Due to this supersaturation in Ti, TiC can be formed. It does not mean that N has no effect. It has to be noticed that the density of inclusions coarser than two microns is highly dependent of the product [Ti] × [N]. Carbon is a very important factor too to take into account as the surpersaturation in Ti in presence of austenite is higher than in presence of delta-ferrite. This gives a few guidelines in the design of inclusions controlled new grades.
No takes yet. Share an insight, caveat, or question.
Lucas et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: