Answers are grounded in this paper and cite their sources.
To mitigate defects and control microstructure in additively manufactured AA6061 via laser powder bed fusion, this study systematically investigates modulated laser processing by varying frequency and duty cycle and correlates the resulting thermal histories with melt–pool behavior, defects, microstructure, and mechanical properties. Across 10–50 kHz and 50–75% duty cycle with laser power of 450–550 W, experiments combined with transient melt–pool simulations reveal two distinct melting regimes. In a remelting–cycle regime (lower duty cycle and/or lower frequency), periodic melt/solidification events produce shallower melt pools with multiple melt pool boundaries within a single track; increasing frequency at low duty cycle further increases boundary multiplicity. This regime reduces cracking and refines grains/subgrains with weaker textures. In a sustained–melting regime (higher duty cycle and frequency), the melt pool remains above the liquidus, yielding deeper pools with a single boundary per track (continuous–laser–like behavior), which suppresses lack–of–fusion porosity but coarsens the microstructure, strengthens texture, and lowers the high–angle grain boundary fraction by ~30% relative to the remelting–cycle regime. The optimal condition achieves ~0.3% porosity with ~0.1% crack density. In the as–built state, the remelting–cycle regime yields the highest mean hardness (~71 HV) and yield strength (~108 MPa), while precipitation and elemental segregation trends remain broadly comparable across modulated–laser and continuous–laser conditions. Post–build T6 heat treatment largely preserves grain/subgrain differences but homogenizes precipitate distributions and phase constituents, generally increasing mean hardness and yield strength up to 110-120 HV and 230-278 MPa, respectively. Overall, this study uncovers how the frequency–duty cycle control of remelting cycles governs defect formation and microstructure evolution, enabling practical parameter selection to improve AA6061 printability and performance.
No takes yet. Share an insight, caveat, or question.
Sun et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: