Answers are grounded in this paper and cite their sources.
Experimental study reveals optimized material removal and surface finish in AZ31B magnesium alloy using bio-dielectric EDM, indicating viable sustainable manufacturing.
Owing to their high work-hardening tendency and low thermal conductivity, machining magnesium alloys is challenging. This study investigated the machining of AZ31B magnesium alloy using sustainable electrical discharge machining (EDM) with boron carbide (B4C) nanoparticles suspended in waste vegetable oil (WVO) as a dielectric fluid under reverse polarity. The effects of current (I), pulse-on time (Ton) and B4C concentration (PC) on particle removal rate (PRR) and machined surface roughness (MSR) were analyzed. The maximum PRR of 0.0271 g/min and minimum MSR of 3.15 μm were achieved. PRR and MSR increased with I, Ton, PC, but PRR declined at higher levels. Optimal conditions (6A, 50 μs, 10 g/L) enhanced PRR and MSR. ANOVA identified ‘I’ as the most influential parameter, contributing 11.57% to PRR and 18.57% to MSR. Scanning electron microscope (SEM) revealed surface defects at 6A, 50μs, 15 g/L. The study highlights WVO-based bio-dielectric potential for sustainable EDM applications.
No takes yet. Share an insight, caveat, or question.
Ajith et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: