Answers are grounded in this paper and cite their sources.
Processing technologies such as laser deep alloying could enable the development of new construction materials based on micro-samples because of the rapid as well as flexible mixture of a base material with pre-deposited alloying elements. To maintain high-throughput material development, these new material compositions need to be characterized rapidly as well. High-throughput experimentation in material development is recognized as a novel and beneficial scientific way to generate knowledge and to identify new alloy compositions. This paper presents and compares different approaches for high-throughput characterization of different micro-samples produced by laser deep alloying. These approaches are based on plastic deformation by the mechanical indentation and reveal information about the material properties by rapidly measurable values called descriptors. The experiments indicate that the shock wave-based indentation technique and the deep rolling process are suitable methods to gain insights regarding the material properties of laser deep-alloyed micro-samples. Both processes show that the plastic deformation slightly increases with elevated laser power in laser deep-alloying process. Subsequent conventional measurements indicated that at higher laser power, lower hardness and lower amount of chromium result from the deep-alloying process. Moreover, local deviations of metallographic constituent, which results in larger hardness deviations, were predicted based on the descriptors.
No takes yet. Share an insight, caveat, or question.
Czotscher et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: