Hydrolysis of sugar cane bagasse with hydrochloric acid: Separation of the acid by pervaporation. Evaluation of the bergius process

Polyester reinforced PTFE membranes with a nominal pore size of 0.02 μm are very effective in pervaporating HCl gas from hydrochloric acid solutions and cellulose hydrolysates. The efficiency of such membranes, which may be as high as 1.8x10−2 mmol HCl min−1 cm−2 at 40°C, is almost independent of the flow rate and the static pressure of the acidic solution but depends strongly on the acid concentration. At an acid concentration of 26% (w/v) the pervaporation of HCl is negligible at 40°C, but can be accelerated by increasing the temperature. A slow increase of temperature during the pervaporation process is proposed, as this promotes post‐hydrolysis of the sugars. Lithium chloride induces structural changes in the membrane which increase efficiency without compromising performance. The use of this new technology in conjunction with the original Bergius process could improve the performance of the latter and reduce its overall costs. The use of the improved process for the hydrolysis of sugar cane bagasse could double the yields of sugar or alcohol per hectare of planted sugar cane.