Answers are grounded in this paper and cite their sources.
Experimental and analytical modeling demonstrates optimal wall face inclination balances stability and material use in drystone retaining walls, suggesting safer and more resource-efficient designs.
Dry masonry retaining walls are widely used to have available flat surfaces for house building and road construction. A rigorous wall design should consider the impact of shape on wall stability, which may control potential failure mechanisms. The authors carried out a series of tilt tests on empty different-shape small-scale wall models to analyze its stability. These tests identified two failure mechanisms, overturning or toppling associated with vertical walls and sliding for walls leant forward a few degrees. Then, the authors extend previously available limit equilibrium method (LEM) based analytical approaches to adapt them to different retaining wall shapes. This approach fits the failure of tilted physical walls, so it was adapted to be applicable to real size retaining walls with fill. This LEM approach, which accounts for both potential failure mechanisms, can be used to find the optimal inclination of the wall face or shape of real walls. Numerical simulation analyses of real walls were performed, which fit well with the analytical results. They were moreover able to account not only for intrinsic failure mechanisms but also for other instability problems such as foundation issues. All the applied approaches consistently pointed to the occurrence of an inclination angle of the form wall face (shape), at which the retaining wall presents an optimal stability level in relation to the quantity of masonry used, which provides theoretical support and a practical tool for optimizing dry masonry retaining wall shape.
No takes yet. Share an insight, caveat, or question.
Ding et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: