This is the authors' abstract. We don't add key points for this paper.
InGaN/GaN vertical light emitting diodes (LEDs) with argon (Ar) and oxygen (O2) plasma-treated nonalloyed Al/Ti electrodes were fabricated on sapphire substrates. At the operating current of 350 mA, the forward voltage (VF) for O2 plasma-treated Al/Ti-based devices with dimensions 1360 × 1360 μm2 was improved, whose value was comparable or lower to that of nonalloyed Cr/Au-based devices. The Al/Ti electrodes resulted in improvement in optical output power of LEDs due to their high reflectivity (typically 10%–15% higher based on our data) compared to LEDs with conventional Cr/Au-based electrodes. The x-ray photoelectron spectroscopy showed the increase in Ga-O peak intensity during O2 plasma treatment. These results demonstrate that O2 plasma-treated Al/Ti electrodes reduced the contact resistance by forming a thin conductive GaOxN1−x layer at n-GaN surface.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Lim et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: