Answers are grounded in this paper and cite their sources.
The temperature dependence of the coercivity of Sm-Co based magnets is investigated by magnetization measurements and model calculations. The Zr-free titanium-substituted Sm-Co material exhibits a positive temperature coefficient dH/sub c//dT of the coercivity (TCC) above room temperature, a reasonable hysteresis-loop shape, and an appreciable coercivity of 12.3 kOe at 500/spl deg/C for the nominal composition Sm(Co/sub 6.2/Cu/sub 0.8/Ti/sub 0.3/). The samples were produced by heat-treating the disordered 1:5 alloy commonly referred to as the TbCu/sub 7/ (or 1:7) phase. X-ray diffraction analysis shows that, upon annealing at 1165/spl deg/C, the starting material segregates into more-or-less stoichiometric 1:5 and 2:17 phases. The TCC is explained by taking into account that two-phase Sm-Co magnets are of the pinning type, that is the coercivity is realized by capturing (or repelling) domain walls at 1:5/2:17 phase boundaries. Starting from a planar-defect approach, the TCC is modeled as a function of the anisotropy constants of the involved phases. The present approach yields a fair agreement between theory and experiment, and explains the existence of a coercivity maximum in terms of the Cu concentration.
No takes yet. Share an insight, caveat, or question.
Zhou et al. (2001) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: