This is the authors' abstract. We don't add key points for this paper.
As a candidate material for high energy density cathode, nickel-rich layered oxide cathode material LiNi 0.6 Co 0.2 Mn 0.2 O 2 has become the current research hotspot for lithium-ion batteries. However, the instability of the surface reaction interface promotes the change of surface structure and bulk structure for LiNi 0.6 Co 0.2 Mn 0.2 O 2, resulting in poor cycling stability that hindered its practical application. Here, the LiNi 0.6 Co 0.2 Mn 0.2 O 2 surface modified by hybrid coating layer (NCM@LSAO) is reported. In this constructed hybrid layer, the LiAlO 2 with layered structure can be firmly anchored on the NCM surface, and Si 1– x Al x O 2 with high electrical conductivity and chemical stability can be used as a protective layer to inhibit the occurrence of surface side reactions. Hence, combining the advantages of the LiAlO 2 and Si 1– x Al x O 2 coating layer, which can effectively suppress the structural transformation and surface reaction interface failure upon long cycling, thus has improved the electrochemical performance accordingly. As a result, LiAlO 2 /Si 1– x Al x O 2 surface-modified LiNi 0.6 Co 0.2 Mn 0.2 O 2 exhibits excellent rate performance, with a high discharge specific capacity of 153.4 mAh/g even at 10 C. In addition, the cyclic stability is also much improved, which can deliver a high discharge capacity of 130.1 mAh/g after 500 cycles at 5 C, with a capacity retention of 78.5%.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Chu et al. (2021) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: