Answers are grounded in this paper and cite their sources.
Poly‐dimethylsiloxane (PDMS) films with 2D periodic inverted moth‐eye nanopatterns on one surface are implemented as antireflection (AR) layers on a glass substrate for efficient light capture in encapsulated organic solar cells (OSCs). The inverted moth‐eye nanopatterned PDMS (IMN PDMS) films are fabricated by a soft imprint lithographic method using conical subwavelength grating patterns formed by laser interference lithography/dry etching. Their optical characteristics, together with theoretical analysis using rigorous coupled‐wave analysis simulation, and wetting behaviors are investigated. For a period of 380 nm, IMN PDMS films laminated on glass substrates exhibit a hydrophobic surface with a water contact angle (θCA) of ≈120° and solar weighted transmittance (SWT) of ≈94.2%, both significantly higher than those (θCA≈ 36° and SWT ≈ 90.3%) of bare glass substrates. By employing IMN PDMS films with a period of 380 nm on glass substrates for OSCs, an enhanced power conversion efficiency (PCE) of 6.19% is obtained mainly due to the increased short‐circuit current density (Jsc) of 19.74 mA cm‐2 compared to the OSCs with the bare glass substrates (PCE = 5.16% and Jsc = 17.25 mA cm‐2). For the OSCs, the device stability is also studied.
No takes yet. Share an insight, caveat, or question.
Leem et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: