Answers are grounded in this paper and cite their sources.
Most of the kinetic studies on nitrification have been performed in diluted salts medium. In this work, the ammonia oxidation rate (AOR) was determined by respirometry at different ammonia (0.01 and 33.5 mg N‐NH3 L−1), nitrite (0–450 mg N‐NO2− L−1) and nitrate (0 and 275 mg N‐NO3− L−1) concentrations in a saline medium at 30 °C and pH 7.5. Sodium azide was used to uncouple the ammonia and nitrite oxidation, so as to measure independently the AOR. It was determined that ammonia causes substrate inhibition and that nitrite and nitrate exhibit product inhibition upon the AOR. The effects of ammonia, nitrite and nitrate were represented by the Andrews equation (maximal ammonia oxidation rate, rAOMAX, = 43.2 [mg N‐NH3 (g VSSAO h)−1]; half saturation constant, KSAO, = 0.11 mg N‐NH3 L−1; inhibition constant KIAO, = 7.65 mg N‐NH3 L−1), by the non‐competitive inhibition model (inhibition constant, KINI, = 176 mg N‐NO2− L−1) and by the partially competitive inhibition model (inhibition constant, KINA, = 3.3 mg N‐NO3− L−1; α factor = 0.24), respectively. The rAOMAX value is smaller, and the KSAO value larger, than the values reported in diluted salts medium; the KIAO value is comparable to those reported. Process simulations with the kinetic model in batch nitrifying reactors showed that the inhibitory effects of nitrite and nitrate are significant for initial ammonia concentrations larger than 100 mg N‐NH4+ L−1.
No takes yet. Share an insight, caveat, or question.
Sánchez et al. (2005) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: