Answers are grounded in this paper and cite their sources.
Flexible pavements with hot-mix asphalt (HMA) may underperform when conventional mineral filler provides insufficient mastic stiffness and moisture resistance. This study evaluates coral rock ash (CRA) as a partial replacement of conventional mineral filler in an asphalt concrete wearing course (AC-WC) mixture to improve laboratory performance and predicted service life. CRA was introduced at 0-10% of the total mixture mass, replacing an equivalent portion of filler in the gradation. Marshall stability/flow and indirect tensile strength (ITS, tensile strength) were measured at an optimum asphalt content of 6%. To link mixture-scale changes to structural performance, layer responses were computed using KENPAVE multilayer elastic analysis, where the HMA elastic modulus was derived from the ITS-based stiffness correlation used in the study (with Poisson's ratio held constant), enabling mechanistic-empirical estimation of critical strains and allowable load repetitions. Regression analysis identified 4.8% CRA as optimal, yielding peak Marshall stability (1060.7 kg) and the smallest 7-day strength loss after 60 °C conditioning. Relative to the control, ITS increased by 22.6% (11.62→14.25, unit-consistent with the original dataset). In the mechanistic analysis, the improved mixture stiffness led to a reduction in bottom-HMA tensile strain (εt) and a corresponding increase in predicted allowable repetitions, extending the design life of the reference pavement section from 5 to 7 years. These findings indicate that CRA is a feasible, locally available supplementary filler for improving HMA performance and extending service life in coastal regions, provided that sourcing uses non-living, naturally stranded coral debris and complies with environmental regulations.
No takes yet. Share an insight, caveat, or question.
Miftahulkhair et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: