Answers are grounded in this paper and cite their sources.
This paper refers to magnetic field shielding effectivenessSHof the selected iron-based amorphous alloys and some magnetic composites. The measurement conditions were chosen regarding the potential sources such as energetic lines or electric devices. As it was shown, the shields made of amorphous and optimized (in amorphous phase) melt spun ribbons can be applied as highly efficient and flexible shields. In the group of the tested alloys, the highestSHreveal (at$H=110$A/m and$f=55$Hz): Fe₈₄Cr₂{ B}₁₄$(95%) and optimized Fe$₇₂$Co$₁₀$Nb$₆B₁₄$(97%) and Fe$₈₀$Nb$₆B₁₄$(92%). In the case of the tested composites, a significant decrease of$SH$was observed. The shielding effectiveness decreases with decreasing size of magnetic addition due to breaking magnetic flux circuit and dipolar interactions between particles. For the composite with magnetic flakes of 4 mm in diameterSHis about 60%; therefore, it can be applied as coatings in order to fulfill human protective standards. For the composites with micro and nano-sized magnetic powderSHdoes not depend of the composition which suggests that a response to a magnetic field is fully influenced by the demagnetization effect.
No takes yet. Share an insight, caveat, or question.
Chrobak et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: