Answers are grounded in this paper and cite their sources.
Operation temperature of typical wire-bonded power modules, especially for harder silicon carbide (SiC) power chips, keeps increasing. The thermo-mechanical reliability of aluminum (Al) wire-bonds which suffer from the mismatch of coefficient of thermal expansion (CTE) between chip and bonding wires reduces significantly. In this letter, a novel laminated Al/copper (Cu) soft stress buffer was proposed between SiC chip and bonding wires, capable of reducing thermo-mechanical stress of the wires and using soft Al wires with low ultrasonic bonding energy instead sophisticated Cu wires. Lifetime of Al wire bonding on the proposed 10-μm Al/40-μm Cu buffer was 5.14 times longer than that on a SiC chip directly under power cycling with constant ΔTj= 110 °C. In the end, a lifetime prediction model was established to guide the laminated buffer design for enhancing the reliability of Al wire-bonded Si diodes.
No takes yet. Share an insight, caveat, or question.
Li et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: