Answers are grounded in this paper and cite their sources.
We use multiphase direct numerical simulations to identify, analyse and quantify components of wall-normal heat flux distributions in evaporative vertical falling films with surface modifications at industrially relevant conditions. Previous experiments showed a potential increase of the heat transfer rate through the film by up to 100 % using various types of modifications. We show that the modifications induce significant advective heat transport and hypothesise that four synergistic mixing mechanisms are behind the heat transfer rate improvement. Additionally, we examine how the important surface topology parameters, pitch p̂ (distance between modifications), height ĥ and the liquid Prandtl number Prₗ , influence the mode of heat transport and the Nusselt number Nu . We show that p̂/ĥ ≈ 10 maximises Nu and that the optimal pitch is related to the recirculation zone length Lᵣ behind the modification. We find that Lᵣ/ĥ ≈ 3.5 and that Nu ∝ Prₗ0.42 in the investigated parameter ranges. We also show that all our cases on both smooth and modified surfaces have Peₗ 1 and collapse well on a line Nu ∝ (Peₗ/Re)0.35 . This relation suggests that Nu is governed by the balance of film mixing, thermal resistance and diffusivity, and that the ratio Peₗ/Re can be used to estimate Nu . Our methodology and findings extend the knowledge concerning the mechanisms behind the heat transfer improvement due to surface modifications and facilitate guidelines for designing more efficient modified surfaces in industrial evaporators.
No takes yet. Share an insight, caveat, or question.
Hidman et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: