This is the authors' abstract. We don't add key points for this paper.
Electric field sensors have demanding requirements regarding their measurable field strength and frequency range. The research community and industry are applying new approaches from related fields to meet these requirements. One approach is to exploit the electro-optical properties and fabrication methods of lithium niobate known from optical communication. This path is pursued in this work, showing the influence of several parameters, including device orientation relative to the crystal axis, on the performance of the chip as an electric field sensor. For this, several microresonators and Bragg gratings were fabricated on a lithium niobate chip and characterized optically and electro-optically on chip with electrodes, as well as in a free space arrangement, where an external electric field is applied to validate the approach for industry applications. A normalized modulation shift of ~110 nm2/V for a microresonator aligned along the extraordinary crystal axis and a shift of ~60 nm2/V for the Bragg grating was measured on chip. Varying the resonator size, a slope of ~(10 mV)/(1 kV/cm) to ~(20 mV)/(1 kV/cm) could be achieved in a free space arrangement at a fixed laser wavelength and with ac electric fields. Depending on the applied field strength, the resonator size is identified as the main factor in achieving the desired measurement range. Including a drop waveguide to the layout of the resonator achieves additional power tunability. The Bragg grating shows to be a valid alternative if an even smaller footprint of below1~μm× 100~μm is favorable. A strong linear relation of the modulation slope of ~ (1.5 mV)/(1 kV/cm) was achieved for a locally applied ac field on-chip.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Wackernagel et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: