Answers are grounded in this paper and cite their sources.
The aim of this work is to study the mechanical properties of temporary composite crowns and temporary composite orthopedic structures manufactured by 3D printing. MATERIALS AND METHODS: For the two studied groups of samples: the original 3D-printed samples and the poured samples from a composite material of a certain shape, 8 samples were made and visually checked for the absence of porosity. The strength and elasticity were measured using the three-point bending method and the hardness was measured using the indentation method. RESULTS: For both materials, the hardness, flexural strength and flexural elasticity show consistently high values required by GOST 24621-2015 (ISO 868:2003) [Plastics and ebonite] and GOST 4648-2014 (ISO 178:2010) [Plastics]. However, the statistical data on bending are higher for the composite material, with a larger spread of the elastic modulus value, in contrast to the 3D-printed samples. CONCLUSION: Both materials are suitable for the manufacture of temporary orthopedic structures. For a more accurate assessment, it is necessary to continue studying the 3D-printed material for cytotoxicity, water absorption, and microstructure.
No takes yet. Share an insight, caveat, or question.
Shneider et al. (2024) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: