Answers are grounded in this paper and cite their sources.
Advances in robotics and automation enhance workforce safety and increase the speed of environmental site characterization. Accordingly, real-time, robot-deployable sensing methods with sufficient analytical performance are needed to support site management decisions. We evaluated two autonomous approaches for soil total petroleum hydrocarbon (TPH) screening: (1) thermal desorption followed by gas chromatography (TD) and (2) direct sensing using a portable near-infrared (NIR) spectrometer. Soil samples from two crude-oil-impacted sites were analyzed and benchmarked against EPA Method 8015 C (solvent extraction and gas chromatography with FID detection). The TD method achieved high precision and agreed with the EPA reference within 3-27 % across 2270-18,980 ppm TPH but requires complex thermal and gas-handling hardware that would have to be engineered for robustness and to be intrinsically safe. The NIR method enabled rapid, reagent-free analysis, however, it also showed larger deviations (20-40 %) among samples. A prototype robotic platform integrating the NIR module was developed and tested in controlled outdoor conditions, demonstrating the feasibility of autonomous, real-time screening. The present study selected a few soil matrices and a realistic range of TPH concentrations to evaluate analytical trends between the two robot-deployable TPH sensors and compared their potential robotic deployment feasibility. Future work should further expand the number of soils and sites, refine the NIR calibration transferability, and engineer the TD-GC components to achieve fully integrated robotic deployment in field settings.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: