Answers are grounded in this paper and cite their sources.
The development of strong and stiff lateral load-resisting systems (LLRS) is essential for mid-rise and high-rise timber buildings. On the other hand, within a seismic design philosophy, strength/stiffness and ductility/drift capacity typically appear as opposite target parameters, depending on the acceptable level of damage. For improved stiffness and strength, core-wall tubular structural forms commonly are used for taller reinforced concrete (RC) buildings. This paper presents an experimental study of a new type of LLRS in cross-laminated timber (CLT). A post-tensioned C-shaped CLT core-wall mainly using screwed connections was designed and tested under unidirectional and bidirectional cyclic loading. It was found that the mixed-angle screwed connection solution was the most effective. The highest partial composite action of 60%–70% was reached and the core-wall system stiffness at serviceability limit state increased more than four times compared with a decoupled test with only friction between the CLT panels. The (unbonded) post-tensioning technology provided strong and stiff core-wall base connections with recentering capability and small residual displacements. The experimental test results confirmed that significant system strength/stiffness and ductility/drift capacity can be achieved in a post-tensioned C-shaped CLT core-wall system with minimal damage through careful connection detailing.
No takes yet. Share an insight, caveat, or question.
Brown et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: