Answers are grounded in this paper and cite their sources.
A novel aluminum iron oxide (Al/AlFe 2 O 4 /p-Si) Schottky photodiode was successfully fabricated via the sol—gel coating process. The microstructure of the spinel ferrite (AlFe 2 O 4 ) was examined by atomic force microscopy. The current—voltage characteristics of the fabricated photodiode were studied under dark and different illumination conditions at room temperature. By using the thermionic emission theory, the forward bias I — V characteristics of the photodiode are analyzed to determine the main electrical parameters such as the ideality factor ( n ) and barrier height (Φ B0 ) of the photodiode. The values of n and Φ B0 for all conditions are found to be about 7.00 and 0.76 eV, respectively. In addition, the values of series resistance ( R s ) are determined using Cheung's method and Ohm's law. The values of R s and shunt resistance ( R sh ) are decreased with the increase of illumination intensity. These new spinel ferrites will open a new avenue to other spinel structure materials for optoelectronic devices in the near future.
No takes yet. Share an insight, caveat, or question.
Tatarǒlu et al. (2014) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: