Answers are grounded in this paper and cite their sources.
Electrospinningtechnique is considered to be one of the most powerful approaches for the preparation of one-dimensional (1D) metal oxide nanofiber networks (NFNs). In this report, In2O3NFNs were fabricated by electrospinning using polymethyl methacrylate (PMMA) as polymer and epoxy resin as additive. Benefiting from the excellent chemical properties of PMMA, In2O3NFNs with impact stacking were prepared at a relatively low annealing temperature by a welding process. The welded In2O3NFNs were characterized by various techniques and the electrical performance of the field-effect transistors (FETs) based on the welded In2O3NFNs were systematically investigated. It is observed that the FET based on In2O3NFNs annealed at 320 °C, with a nanofiber density of 0.4 μm-1exhibits high electrical performance,including an ION/IOFFof ~5×107, a μFEof 1.27 cm2/V s, an on voltage of -8 V and a hysteresis of 5 V. A device array with 4×5 units was fabricated and tested, confirming the excellent reliability and reproducibility of the FET.
No takes yet. Share an insight, caveat, or question.
Fu et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: