Answers are grounded in this paper and cite their sources.
This paper presents the relevant results obtained in two experimental tests with real scale steel fibre reinforced concrete (SFRC) slabs supported in vertical elements representing piles. One slab was made by regular SFRC, while the other was executed with self-stressed (SS) SFRC (SFRSSC). None of the slabs included any type of conventional reinforcements. Extensive experimental programs were conducted to determine the mechanical properties of SFRC and SFRSSC, including specimens prepared at the laboratory and extracted from the slabs. The slabs were tested up to their failure, by monitoring the load versus deflection in selected points, the width and pattern of cracks, and failure modes. For a distance between supports of 3 m (L) in the loading region, the slabs with 0.15 m of thickness supported a uniform distributed load of 45.7 kN/m² (SFRC) and 60.7 kN/m² (SFRSSC). By performing nonlinear finite element analysis (NLFEA) with a commercial software and the design recommendations of actual Eurocode 2, the influence of considering the average and characteristic values of the SFRC and SFRSSC properties on the predictive performance of the adopted model is appraised. By using the estimate coefficient of variation (ECoV) method with the NLFEA, an average value of 1.0 and 0.6 was obtained for q n , d / q e in the SFRC and SFRSSC slab, respectively, where q n , d and q e are the predicted design load with the ECoV method and the registered experimental failure load. • Load bearing capacity of fibre reinforced concrete elevated slabs was 46 and 61 kN/m² • Deflections of the slabs increased 2.6 times when subjected to constant load for 7 days • Numerical simulations predict well the deflections of the experimental slabs • Predicted load capacity strongly depend on the initial post-cracking tensile stresses • Insufficient number of test specimens can result in large global safety factors
No takes yet. Share an insight, caveat, or question.
Skadiņš et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: