Answers are grounded in this paper and cite their sources.
High-precision phase-difference measurement is a key technology for a phase-shift laser range finder. In order to improve the estimation accuracy of phase difference between two sinusoidal signals with identical frequency, the phase-shift correlation method is described. Theoretical analysis shows that the conventional cross-correlation method will bring notable deviations when the true phase difference is close to 0° or 180° in the presence of noise. For reducing the influence of noise, two step calculations--phase-shift autocorrelation and phase-shift cross correlation--are used in the phase-shift correlation method. The estimation bias is eliminated by phase-shift autocorrelation in which the autocorrelation is calculated between the 2π phase-shifted signal and the original signal, and the periodic errors are eliminated by phase-shift cross correlation in which the phase difference is estimated when the true phase difference is near 90° or 270°. The effect of frequency drift on the phase difference is also discussed. The experiment results show that the maximum error of the conventional method is about 0.15°, while the estimation error of our proposed method is much less than 0.01° under the same conditions.
No takes yet. Share an insight, caveat, or question.
Liu et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: