Answers are grounded in this paper and cite their sources.
The oxidation of a Ni–30Cr alloy at 700 °C in impure argon was studied in order to provide new elements of understanding on chromia scale growth in low oxygen partial pressure atmosphere (10 −5 atm). Oxidation tests were carried out during 30 min to 50 h in a thermogravimetric analysis system using a symmetrical balance with in situ monitoring of the oxygen partial pressure. The oxidation kinetics were determined as parabolic with an estimated stationary parabolic constant value of 10 −15 cm 2 s −1 , after a transient stage of about 3 h. The oxide scale was identified as a pure chromia layer by TEM and XPS characterisations. After 50 h at 700 °C, the scale thickness estimated by TEM cross section observation was about 100 nm. A slightly thicker and more porous oxide scale was observed above the alloy’s grain boundaries. The metal/oxide interface also exhibited a deeper recession towards the substrate above the alloy’s grain boundaries. The orientation of chromia grains was determined by TKD (transmission Kikuchi diffraction). A strong preference was noted for the orientation perpendicular to the surface, along the < 0001 > direction of the corundum structure. Finally, the type of semiconduction was determined for the scales formed after 7 h and 50 h of oxidation. For the shorter oxidation time, the chromia scale exhibited an n -type semiconduction, whereas for the longer exposure, both n -type and insulating semiconduction were identified.
No takes yet. Share an insight, caveat, or question.
Bataillou et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: