This is the authors' abstract. We don't add key points for this paper.
Platinum group metal (PGM)-free and Cr-free automotive three-way catalyst (TWC) was examined using two types of base-metal oxides for hydrocarbon preferential oxidation (HC-PROX) and NO reduction by CO in tandem configuration. MnOx-based binary mixed metal oxides (X1Mn2, X = Ba, Ca, Co, Cu, Fe, Mg, Ni, Zn, Zr) were investigated for the design of HC-PROX catalysts. Mg1Mn2 achieved both high propene oxidation activity and low CO oxidation activity, and the catalyst phase was determined as MgMn 2 O 4 having the spinel structure. A tandem TWC composed of MgMn 2 O 4 for HC-PROX and CuCo 2 O 4 for NO-CO reaction showed comparable NO reduction activity and higher oxidation activity of propene and CO compared to Rh/ZrO 2 as a benchmark. In-situ FTIR study clarified that the suppression of CO oxidation over MgMn 2 O 4 is caused by strongly adsorbed acetate and formate on the catalyst surface. • MgMn 2 O 4 shows high activity and selectivity for hydrocarbon preferential oxidation. • Strong adsorption of acetate and formate suppresses CO oxidation. • High TWC activity was obtained using MgMn 2 O 4 + CuCo 2 O 4 tandem catalyst. • A PGM-free and Cr-free tandem TWC was proposed.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Maruichi et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: