Answers are grounded in this paper and cite their sources.
The current paper explores the dual influence of phase change material (PCM) and hybrid nanofluid to improve and prolong the productivity of a traditional flat plate solar collector (FPSC). Experimentally, two identical FPSCs were designed, fabricated and examined under hot weather conditions, considering numerous thermal, energy, exergy and economic aspects. PCM-microencapsulated thermal bags and Multiwall Carbon Nanotube-Aluminium Oxide (MWCNT- Al 2 O 3 ) nanofluid with 0.15 % and 0.2 % concentrations were investigated in three different cases compared to a reference case. The PCM bags were integrated behind the FPSC absorber in one case, while the other cases explored the improvement of circulating MWCNT-Al 2 O 3 nanofluid with 0.15 % and 0.2 % concentrations. Study findings indicated that the FPSC output temperature was improved by employing PCM bags and enhanced further when introducing MWCNT-Al 2 O 3 hybrid nanofluid. Specifically, energy analysis displayed that the energy gain improvement reached up to 26 %, 47 % and 54 %, for the FPSC integrating PCM, PCM with MWCNT- Al 2 O 3 nanofluid at 0.15 % and 0.2 % concentrations, respectively. Moreover, the thermal efficiency for the FPSC integrated PCM, PCM with MWCNT- Al 2 O 3 at 0.15 % and 0.2 % concentrations, was enhanced by 10 %, 21 % and 26 % over the reference case, while the exergy efficiency was augmented by 9 %, 31 %, and 38 %, respectively. Furthermore, economic analysis displayed that employing PCM with MWCNT-Al 2 O 3 hybrid nanofluids at 0.2 % concentration has shortened the FPSC payback period by 25%, verifying the feasibility of the suggested enhancement techniques.
No takes yet. Share an insight, caveat, or question.
Alktranee et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: