Soluble and transparent polyimides with highTgfrom a new diamine containingtert‐butyl and fluorene units

A novel diamine monomer1, 4,4'‐(9H‐fluorene‐9,9‐diyl)‐bis(2‐tert‐butylaniline), was synthesized from 9‐fluorenone and 2‐tert‐butylaniline by the condensation reaction. Then it was polymerized with several commercial aromatic dianhydrides, respectively, to produce polyimides (PIs) by the one‐pot method. The number‐averaged molecular weights of the resulting PIs are in the range of (4.54–8.82) × 104with polydispersity indices from 2.51 to 4.33 by gel permeation chromatography measurement. They are soluble in many organic solvents and can form transparent and tough films by solution‐casting. The cut‐off wavelengths of UV–vis absorption for the PI films are below 360 nm, which are much lower than that of Kapton film. The light transparency of them is above 90% in the visible light range from 400 to 760 nm. They also display relatively low dielectric constants (from 2.79 to 3.00), low water absorption rates (<1%), and high tensile strength (> 50 MPa). Their excellent solubility and transparency can be attributed to the incorporation oftert‐butyl groups and fluorene units into the rigid backbones of PIs. Simultaneously, they still maintain the high thermal stability (the 5% weight loss temperature in the range from 526 to 539 °C in nitrogen) and the high glass transition temperatures (Tg > 340 °C).