Answers are grounded in this paper and cite their sources.
A typical planar structure is the most feasible conceptual design of betavoltaic battery due to its simplicity. The self-absorption of beta source, however, causes a limitation to the geometrical efficiency. Herein, we tried to investigate the self-absorption event in Ni-63 beta source by changing the geometrical aspects and evaluated its effect on each layer of a 4H-SiC semiconductor as the radiation-electricity converter. The design configuration from previous literature was adopted and the model was developed using Monte Carlo N-Particle X (MCNPX) consists of radioisotope source, semiconductor, and also ohmic contacts. The energy of beta emission was adjusted to the actual Ni-63 beta spectra with an isotropic distribution of ejected particles. The average beta energy deposition degrades along with the addition of source mass thickness, but the n+ substrate has a unique result where a peak is observed at 0.1246 mg/cm2 due to the self-absorption effect. Furthermore, the rectangular surface area magnification gives a positive impact on the beta energy deposition up to 2.48% and the photon average energy deposition up to 137.21%. The results of average electron absorbed dose are consistent with Oldano-Pasquarelli semi-empirical theory of self-absorption in the beta source, where the upper layer receives a wider angular distribution of particles compared to the lower one, which corresponds to the counting geometrical coefficients.
No takes yet. Share an insight, caveat, or question.
Rahastama et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: