Numerical modeling reveals simultaneous power generation and space heating using hybrid thermoelectric solar collectors, highlighting potential efficiency gains for building thermal systems.
The present work aimed to examine the performance of a thermoelectric generator (TEG) augmented with a hydronic evacuated tube solar collector heat exchanger used to heat a cold zone. TEGs were operated on the temperature difference between hot water circulated through the heat exchanger and the cold temperature of the surrounding space. The setup model of a heat exchanger with TEGs installed on the outer surface was examined numerically under steady state conditions for natural and forced convection modes. The results obtained show that 1.03 W of electricity could be produced when the temperature differences across the TEG and air velocity are 60 °C and 0.5 m/s, respectively. Also, an increase of 17.47% of TEG power was achieved for each 5 °C drop in surrounding space temperature and by 11% for each 5 °C rise in circulated hot water temperature. Besides the importance of improving TEG efficiencies, the amount of generated electricity may be valuable when large-surface area heat exchanger units are installed in large systems.
No takes yet. Share an insight, caveat, or question.
Al-Tahaineh et al. (2022) studied this question.
Synapse has enriched 5 closely related papers on similar clinical questions. Consider them for comparative context: