Microstructure as a key parameter for understanding chloride ingress in alkali-activated mortars

This study aims to evaluate the influence of microstructural properties on the chloride diffusion resistance of alkali-activated materials (AAMs) based on blast furnace slag and/or fly ash, with variable activator doses (represented as Na2O%). Resistance to chloride penetration was tested using accelerated chloride penetration (NT BUILD 443) and chloride migration (NT BUILD 492) tests. Addition of slag to alkali-activated mortars mainly based on fly ash reduced porosity and chloride permeability. Chloride penetration decreased with increasing Na2O%, but porosity and pore structure did not follow the same trend. The pore threshold (dth) and critical pore radius (rcrit) determined by mercury intrusion porosimetry had a good correlation with the chloride diffusion coefficient. Both the quantification of reaction products and the correlation between chloride penetration and pore surface area indicated that physical chloride adsorption on the C-A-S-H/N-A-S-H gel surfaces predominated over chemical chloride binding.